Size	20mm to 90mm
Standart	EN 50262 : 1999
Application	Outdoor or Indoor for use with all types of Unarmoured Cable
Function	Provide Seal on Outer Sheath of the Unarmoured Cable
Material	Brass BS 2874 CZ121 Pb3
Optional Threads	METRIC, NPT, BSP, PG or as specified
Finish	Brass Finish, Nickel Finish, Chrome Finish or as specified
Operating Temp.	Standard seals -20 to +80 C
Accessories	Matching Accessories available like PVC Shrouds, Lock Nuts, Earth Tags, Reducers, Adaptors, etc. as per the requirement
IP Rating	IP 54

Cable Gland

Size	Mounting Thread		Cable Dimensions		Across Corner Diameter
	Dia mm	Length mm	A (min)	A (max)
A2 16	16	10	5.0	9.0	21.9
A2 20S	20	10	9.0	12.0	25.0
A2 20	20	10	11.0	14.0	27.5
A2 25S	25	10	13.5	17.0	33.3
A2 25	25	10	16.5	20.2	36.7
A2 32S	32	10	20.0	24.0	45.0
A2 32	32	10	24.0	27.0	45.0
A2 40S	40	15	26.0	30.0	50.0
A2 40	40	15	29.0	33.0	53.0
A2 50S	50	15	33.0	38.0	64.0
A2 50	50	15	38.0	44.0	68.0
A2 63S	63	15	44.0	50.0	81.0
A2 63	63	15	50.0	56.0	83.0
A2 75S	75	15	56.0	62.0	96.0
A2 75	75	15	62.0	68.0	100.0
A2 88/90	88/90	15	68.0	78.0	115.0

Size		20 mm to 90 mm
Application	Dry Indoor, for use with all types of SWA Cable
Function	Provide mechanical Cable Retention & Electrical Wire continuity via Armoured Wire.
Material	Brass BS 2874 CZ121 Pb3
Optional Threads	METRIC, NPT, BSP, PG or as specified
Finish	Brass Finish, Nickel Finish, Chrome Finish or as specified
Operating Temp	-80 C to +300 C
Accessories	Matching Accessories available like PVC Shrouds, Lock Nuts, Earth Tag, Reducers, Adaptors, etc. as per the requirement
IP Rating	IP 54

BW Cable Gland

Size	Metric Thread “C”	Min Thread Length “D”	Cable Dia. “A” Max	Cable Dia. “B” Max.	Armour Wire Dia.	Main across Comer Dia. “E”
20S	20	10	11.6	16.1	0.9/1.25	24.4
20	20	10	13.9	21.1	0.9/1.25	30.0
25	25	10	19.9	27.4	1.25/1.60	36.0
32	32	10	26.2	34.4	1.60/2.00	44.5
40	40	15	32.1	42.4	1.60/2.00	56.3
50S	50	15	38.1	50.1	2.00/2.50	63.4
50	50	15	44.0	55.7	2.00/2.50	72.1
63S	63	15	50.0	62.4	2.50	83.7
63	63	15	55.9	68.2	2.50	88.7
75S	75	15	61.9	76.8	2.50	99.8
75	75	15	67.9	82.9	2.50/3.15	105.3

Brass Locknuts

Application	Brass Locknuts re traditional components used in fastening glands to the gland plate & as they are identical material to the gland, corrosion effects are minimal.
Function	With ISO metric thread. To secure only brass cable glands to a gland plate
EMC	With ISO metric thread with cutting edges to cut through paint layers or powder coatings, for optimum contact.
Matrial	Brass BS 2874 CZ121 Pb3
Thread	ET NPT BSP BSPT PG
Plating	Chrome (CP) Nickel (NP) Tin (TP)

Brass Earth Tag

Application	Installed between the gland entry & equipment, provides an earth bond connection
Function	Produces an earth bond connection for electrical continuity
Material	Brass BS 2870 CZ123 lead
Type	With Brass Screws & Washers, Plain Hole
Plating	Nickel (NP) Chrome (CP) Zinc (ZP) Tin (TP)
Shape	Available in many shapes & thickness in all sizes, can be coated or plated to customers specification as mentioned.

Hexagonal Reducers & Stop Plugs

Application	Reducer allows a PG threaded gland to be terminated in enclosures with different entry thread form (ET NPT BSP BSPT)
Function	Reduce the entry thread diameter of enclosures
Material	Brass BS 2874 CZ121 Pb3
Finish	Electro Nickel Plated
Thread	Metric (ISO) ET NPT BSP BSPT
Plating	Chrome (CP) Zinc (ZP) Tin (TP)
Application	Stop Plug may be used to close thread entries or means of sealing & stopping unused thread entries in flame proof enclosures
Ingress Protection	IP66 (with Nickel Thread Seal) IP368 (3 bar-with Nitrite 'O' Rings)
Options Thread	ET NPT BSP BSPT & PG

PVS Shrouds

Application	Push on shrouds which are used to minimize the risk of dirt or foreign substances gathering on the Cable Gland Body, and/or point of cable to a gland interface.
Function	For all types of gland applications to provide additional protection & enhances the IP rating of the gland termination.
Material	PVC DIP moulded (Black)
Operating Temp	PVC DIP moulded -200 C to +1000 C
	Injection moulded -200 C to +800 C

Star Washers

Application	The serrated lock washer with external teeth for cable glands
Material	Brass
Size	From M 20 to M 63

Seals & 'O' Rings

Application	To maintain the IP rating between equipment & cable glands it may be necessary to fit an entry thread sealing washer at the gland entry interface.
Material	Nitrite Rubber & EPDM
Options Material	PVC (Black) Silicon (Orange) Polyamide or Nylon (White) Red Fibre.
Special Feature	Seals available for both external of & internal use.

Size	20mm to 90mms S & L
Application	For indoor or outdoor use with all types of SWA Cable
Function	Provide for Environmental Seal in the Cable Outer Sheath,. Also provide mechanical cable retention & electrical continuity.
Material	Brass BS 2874 CZ121 Pb3
Optional Threads	METRIC, NPT, BSP, PG or as specified
Finish	Brass Finish, Nickel Finish, Chrome Finish or as specified
Operating Temp.	Standard seals -20 to +80 C
Accessories	Matching Accessories available like PVC Shrouds, Lock Nuts, Earth Tags, REducers, Adaptors, etc. as per the requirement

CW Cable Gland

Size	Mounting Thread	Cable Dimensions	Armour Wire Diameter	Across Corner Diameter
	Dia mm	Length Mm	A (max)	B (max)
16/20	16/20	10	8.7	13.2	0.90	25.0
20S	20	10	11.6	16.8	0.90 - 1.25	28.5
20	20	10	13.9	20.8	0.90 - 1.25	34.5
25S	25	10	17.3	24.0	1.25 - 1.60	36.0
25	25	10	19.9	27.0	1.25 - 1.60	40.0
32	32	10	26.3	33.0	1.60 - 2.00	48.5
40S	40	15	30.2	37.8	1.60 - 2.00	56.0
40	40	15	32.2	41.0	1.60 - 2.00	58.5
50S	50	15	39.8	47.0	2.00 - 2.50	68.0
50	50	15	44.0	52.2	2.00 - 2.50	72.5
63S	63	15	50.0	60.3	2.00 - 2.50	82.0
63	63	15	55.8	66.0	2.00 - 2.50	88.0
75S	75	15	62.2	72.0	2.50 - 3.20	98.0
75	75	15	67.8	78.0	2.50 - 3.20	107.5
88/90	88/90	15	80.0	90.0	2.50 - 3.20	124.0

Size	20 mm to 90 mm S & L
Application	For indoor or outdoor use with all types of SWA Cable
Function	Provide for Environmental Seal in the Cable Outer sheath. Also, provide mechanical cable retention & electrical continuity
Material	Brass BS 2874 CZ121 Pb3
Optional Threads	METRIC, NPT, BSP, PG or as specified
Finish	Brass Finish, Nickel Finish, Chrome Finish or as specified
Operating Temp.	Standard seals -20 C to +80 C
Accessories	Matching Accessories available like PVC Shrouds, Lock Nuts, Earth Tag, Reducers, Adaptors, etc. as per the requirement
IP Rating	IP 66

E1W Cable Gland

	Dia mm	Length mm	A (min)	A (max)	B (min)	B (min)
16/20	16/20	10	4.5	8.7	8.4	13.5	0.9	25.0
20S	20	10	8.0	11.6	12.9	16.8	0.90-1.25	28.5
20	20	10	10.9	13.9	15.8	20.8	0.90-1.25	34.5
25S	25	10	13.3	17.3	20.0	24.0	1.25-1.60	36.0
25	25	10	16.5	19.9	21.0	27.0	1.25-1.60	40.0
32	32	10	19.3	26.3	26.7	33.0	1.60-2.00	48.5
40S	40	15	24.2	30.2	32.8	37.8	1.60-2.00	56.0
40	40	15	26.0	32.2	35.5	41.0	1.60-2.00	58.5
50S	50	15	32.8	39.8	41.5	47.8	2.00-2.50	68.0
50	50	15	36.5	44.0	45.7	52.2	2.00-2.50	72.5
63S	63	15	42.5	50.0	52.1	60.3	2.00-2.50	82.0
63	63	15	48.5	55.8	59.0	66.0	2.00-2.50	88.0
75S	75	15	54.5	62.2	65.2	72.0	2.50-3.20	98.0
75	75	15	60.5	67.8	71.8	78.0	2.50-3.20	107.5
88/90	88/90	15	68.0	80.0	78.2	90.0	2.50-3.20	124.0

Size	10 mm to 90 mm
Application	Outdoor or Indoor for use with all types of braided or unarmoured Marine electrical cable fittings
Optional Thread	ISO Metric, NPT, NPS, BSP, BSPT, PG
Finish	Chrome Finish, Brass Finish, Nickel Finish or as specified
Material	Brass BS 2874 CZ121 Pb3
IP Rating	IP54 IP66
Sizes	Metric from 10 mm to 60 mm in JIS, PG 7 to PG 48 in DIN from M 16 to M 90 in BS